| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.641 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 2.779 INCHES MINIMUM AND 2.787 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | FRICTION |
| CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 120.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 40 ALL MATING ENDS |
| CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM DC VOLTAGE RATING IN VOLTS | 200.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM FREQUENCY RATING | 0.4 KILOHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC 1ST TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND NICKEL ALL MATING ENDS SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.433 INCHES MINIMUM AND 1.441 INCHES MAXIMUM |
| GUIDE DESIGN AND LOCATION | HEXAGON SHAPE MALE POST LEFT-HAND AND HEXAGON SHAPE MALE POST CENTER AND HEXAGON SHAPE MALE POST RIGHT-HAND AT 6 OCLOCK |
| INCLUDED CONTACT QUANTITY | 40 1ST MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 40 2ND MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC ALL MATING ENDS |
| OVERALL HEIGHT | 3.095 INCHES MINIMUM AND 3.125 INCHES MAXIMUM |
| OVERALL LENGTH | 1.401 INCHES MAXIMUM |
| OVERALL WIDTH | 1.985 INCHES MINIMUM AND 2.015 INCHES MAXIMUM |
| MATING END QUANTITY | 2 |
| POLARIZATION METHOD | MATING END AND 3 POLARIZATION POSTS |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.080 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY II,CLASS 3 FED SPEC ALL TREATMENT RESPONSES |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| SHELL TYPE | SOLID |
| TERMINAL LOCATION | BACK ALL MATING ENDS SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL ALL MATING ENDS SINGLE CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.118 INCHES MINIMUM AND 0.122 INCHES MAXIMUM |