| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.431 INCHES MINIMUM AND 0.462 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.719 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT POSITION ARRANGEMENT STYLE | 10-6 SINGLE MATING END |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.719 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND THERMAL SHOCK RESISTANT AND CORROSION RESISTANT |
| INSERT POSITION IN DEG | 0.0 AND 124.0 AND 152.0 AND 219.0 AND 265.0 |
| OVERALL HEIGHT | 0.954 INCHES MAXIMUM |
| OVERALL LENGTH | 1.320 INCHES MAXIMUM |
| OVERALL WIDTH | 0.954 INCHES MAXIMUM |
| MATING END QUANTITY | 12 |
| NOMINAL THREAD SIZE | 0.562 INCHES AND 0.812 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY AND KEY, MULTIPLE KEY GROOVE |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-591,COMP A-13 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY OR ZINC |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES |
| SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE OR NICKEL |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | COUNTERSINK MOUNTING HOLES,100 DEGREES ON EDGE OF FLANGE |
| THREAD CLASS | 2A AND 2B |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 24 AND 40 |
| THREAD SERIES DESIGNATOR | UNEF |
| THREADED DEVICE TYPE | BACK SHELL OR COUPLING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |