| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.317 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.375 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 24-61 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.375 INCHES NOMINAL |
| INSERT POSITION IN DEG | 26.0 |
| OVERALL HEIGHT | 1.703 INCHES MAXIMUM |
| OVERALL LENGTH | 0.916 INCHES MAXIMUM |
| OVERALL WIDTH | 1.703 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 1.438 INCHES |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.061 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | WIRE J9-C SHORTED TO J9-GG |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD QUANTITY PER INCH | 18 |
| THREAD SERIES DESIGNATOR | UNEF |
| THREADED DEVICE TYPE | BACK SHELL |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.170 INCHES MINIMUM AND 0.174 INCHES MAXIMUM |