|
|
|
National Stock Number:
5935-01-290-2394
Federal Supply Class:
5935
National Item Identification Number:
012902394
Description:
BACKSHELL,ELECTRICAL CONNECTOR
Detail:
An item specifically designed to be placed around that portion of a CONNECTOR, RECEPTABLE, ELECTRICAL or CONNECTOR, PLUG, ELECTRICAL which contains the facilities for attaching wires or cables. It may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. It may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
|
Manufacturer Information:
| M28840/924WB | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M288440/924WB | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-28840/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28840/9 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY ANGLE IN DEG | 135.0 | | CABLE OPENING DIAMETER | 0.438 INCHES MINIMUM AND 0.750 INCHES MAXIMUM | | CABLE OPENING QUANTITY | 1 | | DISTANCE FROM CENTERLINE TO CABLE END | 9.754 INCHES MINIMUM AND 9.994 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CONNECTOR END | 2.259 INCHES MAXIMUM | | OVERALL WIDTH | 1.513 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | NOMINAL THREAD LENGTH | 0.228 INCHES | | NOMINAL THREAD SIZE | 1.125 INCHES | | SIZE DESIGNATION | 9 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-28840/9 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | ANGLE TYPE W/CLAMP | | SURFACE TREATMENT | CADMIUM AND NICKEL | | TEST DATA DOCUMENT | 81349-MIL-C-28840 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2B | | THREAD DIRECTION | RIGHT-HAND | | THREAD QUANTITY PER INCH | 18 | | THREAD SERIES DESIGNATOR | UNEF |
|
|