| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 5.950 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | FRICTION |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,COMPOSITION 2 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 3.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 3 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TY II,CL 1 MIL SPEC 1ST TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING AND QQ-N-290 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | VIBRATION RESISTANT AND SHOCK RESISTANT AND MOISTURE RESISTANT AND SALT SPRAY PROOF AND CORROSION RESISTANT |
| GUIDE DESIGN AND LOCATION | KEY SHAPE PIN LEFT-HAND AT 9 OCLOCK AND KEY SHAPE PIN RIGHT-HAND AT 9 OCLOCK |
| INSERT MATERIAL | PLASTIC SINGLE MATING END |
| MATING END QUANTITY | 1 |
| III BODY STYLE | ANGLE SHAPE, PCB TYPE |
| INCLUDED CONTACT QUANTITY | 168 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| POLARIZATION METHOD | GUIDE PIN/SOCKET |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.168 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| PROPRIETARY CHARACTERISTICS | PACS |
| OPERATING TEMP RATING | -55.0 DEG CELSIUS MINIMUM AND 105.0 DEG CELSIUS MAXIMUM |
| OVERALL HEIGHT | 0.699 INCHES NOMINAL |
| OVERALL LENGTH | 6.150 INCHES NOMINAL |
| OVERALL WIDTH | 0.385 INCHES NOMINAL |
| SHELL MATERIAL | ALUMINUM ALLOY 6061 |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL SURFACE TREATMENT | ANODIZE |
| SHELL TYPE | SOLID |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY II,CL 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| TERMINAL LOCATION | SIDE SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | PRINTED CIRCUIT SINGLE MATING END SINGLE CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.064 INCHES MINIMUM AND 0.067 INCHES MAXIMUM |