| CONNECTOR LOCKING METHOD | FRICTION |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-613,ALLOY 260 FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 2 ROWS OF CONTACTS NON-INSERTED BOARD SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 300.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 3.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TY 2,GRADE C,CL 1 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CL 1 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 5.195 INCHES MINIMUM AND 5.205 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | COLD RESISTANT AND HEAT RESISTANT AND HUMIDITY RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND CORROSION RESISTANT |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 100 SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TY SDG-F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE GLASS FILLED SINGLE MATING END |
| OVERALL HEIGHT | 1.800 INCHES NOMINAL |
| OVERALL LENGTH | 5.730 INCHES MINIMUM AND 5.750 INCHES MAXIMUM |
| OVERALL WIDTH | 0.280 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.100 GOLD GRAINS, TROY |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | AISI 410 ASSN STD SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | STEEL COMP 410 |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | UPPER AND LOWER CONTACTS ARE BRIDGED |
| TERMINAL LOCATION | BACK AND SIDE SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | TAB, SURFACE SINGLE MATING END SINGLE CONTACT GROUPING |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.102 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |