| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.791 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.250 INCHES MINIMUM AND 1.375 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT POSITION ARRANGEMENT STYLE | 23-53 SINGLE MATING END |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.250 INCHES MINIMUM AND 1.375 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT AND DUST RESISTANT AND FUEL RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND OIL RESISTANT AND SHOCK RESISTANT AND VIBRATION RESISTANT AND THERMAL SHOCK RESISTANT |
| INCLUDED CONTACT QUANTITY | 53 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC EPOXY SINGLE MATING END |
| INSERT POSITION IN DEG | 50.0 AND 160.0 AND 190.0 AND 225.0 |
| OVERALL HEIGHT | 1.677 INCHES MINIMUM AND 1.701 INCHES MAXIMUM |
| OVERALL LENGTH | 1.325 INCHES MAXIMUM |
| OVERALL WIDTH | 1.677 INCHES MINIMUM AND 1.701 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 34.0 MILLIMETERS AND 1.500 INCHES |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 200.0 CELSIUS MAXIMUM |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.053 GOLD GRAINS, TROY |
| SHELL MATERIAL | STEEL CORROSION RESISTING |
| SHELL SURFACE TREATMENT | PASSIVATE |
| SHELL TYPE | SOLID |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A |
| THREAD SERIES DESIGNATOR | ISO M AND SPECIAL ACME |
| THREAD PITCH IN MILLIMETERS | 1.00 |
| THREAD QUANTITY PER INCH | 10 |
| THREAD TOLERANCE CLASS | 6G EXTERNAL |
| THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY |