| BODY STYLE | STRAIGHT SHAPE, RECTANGULAR |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.250 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | JACKSCREW |
| CONTACT POSITION ARRANGEMENT STYLE | 158 SINGLE MATING END |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.500 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | THERMAL SHOCK RESISTANT AND CORROSION RESISTANT AND VIBRATION RESISTANT AND SHOCK RESISTANT AND HUMIDITY RESISTANT |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TYPE SDG-F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE GLASS FILLED OR PLASTIC EPOXY OR PLASTIC PHENOLIC SINGLE MATING END |
| OVERALL HEIGHT | 1.920 INCHES MINIMUM AND 1.927 INCHES MAXIMUM |
| OVERALL LENGTH | 1.776 INCHES MINIMUM AND 1.806 INCHES MAXIMUM |
| OVERALL WIDTH | 2.868 INCHES MINIMUM AND 2.882 INCHES MAXIMUM |
| MATING END QUANTITY | 12 |
| NOMINAL THREAD SIZE | 0.250 INCHES |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 150.0 CELSIUS MAXIMUM |
| POLARIZATION METHOD | POLARIZATION BOSS AND GUIDE PIN/SOCKET |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SHELL MATERIAL | STEEL COMP 303 OR STEEL COMP 302 OR STEEL COMP 304 |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-85028/1 GOVERNMENT SPECIFICATION |
| TEST DATA DOCUMENT | 81349-MIL-C-85028 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A AND 2B |
| THREAD SERIES DESIGNATOR | UNF AND UNEF |
| THREAD QUANTITY PER INCH | 28 |
| THREADED DEVICE TYPE | COUPLING FACILITY AND BACK SHELL |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.145 INCHES MINIMUM AND 0.154 INCHES MAXIMUM |