| MATING END QUANTITY | 1 |
| CONTACT POSITION ARRANGEMENT STYLE | 15-21 SINGLE MATING END |
| INCLUDED CONTACT QUANTITY | 21 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| BODY STYLE | ANGLE SHAPE W/CABLE CLAMP |
| OVERALL DIAMETER | 1.593 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE TO CONNECTOR END | 3.556 INCHES MAXIMUM |
| DISTANCE FROM CENTERLINE TO CABLE END | 5.713 INCHES MAXIMUM |
| BODY ANGLE IN DEG | 90.0 |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| THREADED DEVICE TYPE | COUPLING FACILITY |
| THREAD SERIES DESIGNATOR | DOUBLE STUB |
| NOMINAL THREAD SIZE | 1.062 INCHES |
| THREAD CLASS | 2B |
| THREAD QUANTITY PER INCH | 10 |
| THREAD DIRECTION | RIGHT-HAND |
| CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP |
| CABLE ENTRANCE DIAMETER | 0.438 INCHES MINIMUM AND |
| 0.750 INCHES MAXIMUM |
| SHELL TYPE | SOLID |
| SHELL MATERIAL | ALUMINUM |
| SHELL SURFACE TREATMENT | CADMIUM AND |
| CHROMATE AND |
| NICKEL |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 3 FED SPEC 1ST TREATMENT RESPONSE AND |
| QQ-P-416,TYPE 2,CLASS 3 FED SPEC 2ND TREATMENT RESPONSE |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| INSERT POSITION IN DEG | 0.0 AND |
| 80.0 AND |
| 142.0 AND |
| 196.0 AND |
| 293.0 |
| INSERT MATERIAL | PLASTIC FLUOROSILICONE SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND |
| CORROSION RESISTANT AND |
| THERMAL SHOCK RESISTANT AND |
| VIBRATION RESISTANT AND |
| HEAT RESISTANT AND |
| COLD RESISTANT |
| TEST DATA DOCUMENT | 81349-MIL-C-28840 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| OPERATING TEMP RATING | -55.0 DEG CELSIUS MINIMUM AND |
| 200.0 DEG CELSIUS MAXIMUM |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.021 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| SPECIAL FEATURES | 20-20 WIRE SIZE PIN CONTACTS IN LIEU OF 20-22 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-28840/28 GOVERNMENT SPECIFICATION |
| SPEC/STD CONTROLLING DATA | |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-28840/28 |
| MANUFACTURERS CODE | 81349 |
| DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | M28840/28CC1DAF1 |