| BODY STYLE | STRAIGHT SHAPE |
| CONNECTOR LOCKING METHOD | FRICTION |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-B-626,HALF-HARD FED SPEC 1ST MATERIAL RESPONSE OR QQ-B-613,HALF-HARD FED SPEC 2ND MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY 360 OR COPPER ALLOY 260 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS | 300.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 3.0 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE 2,GRADE C,CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE AND QQ-N-290,CLASS 1 FED SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD AND NICKEL SINGLE MATING END SINGLE CONTACT GROUPING |
| DISTANCE BETWEEN MOUNTING FACILITY CENTERS | 5.265 INCHES MINIMUM AND 5.285 INCHES MAXIMUM |
| ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| FEATURES PROVIDED | PRE-TINNED TERMINAL |
| GUIDE DESIGN AND LOCATION | D SHAPE PIN LEFT-HAND BOTTOM AND D SHAPE PIN RIGHT-HAND BOTTOM AT 6 OCLOCK |
| INCLUDED CONTACT TYPE | FLAT PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 250 SINGLE MATING END SINGLE CONTACT GROUPING |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | L-P-410 FED SPEC SINGLE MATERIAL RESPONSE OR ASTM-D4066-82 ASSN STD SINGLE MATERIAL RESPONSE SINGLE MATING END |
| INSERT MATERIAL | PLASTIC POLYAMIDE (NYLON) SINGLE MATING END |
| OVERALL LENGTH | 5.430 INCHES MINIMUM AND 5.450 INCHES MAXIMUM |
| OVERALL WIDTH | 0.580 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 0.086 INCHES |
| OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 105.0 CELSIUS MAXIMUM |
| POLARIZATION METHOD | GUIDE PIN/SOCKET |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.250 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL | GOLD |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-200/8 FED SPEC 1ST MATERIAL RESPONSE OR QQ-A-200/9 FED SPEC 2ND MATERIAL RESPONSE |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 2 MIL SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY 6061 OR ALUMINUM ALLOY 6063 |
| SHELL SURFACE TREATMENT | ANODIZE |
| SHELL TYPE | SOLID |
| SPECIAL FEATURES | FLEXIBLE HARNESS INCLUDED WITH CONNECTOR |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | PRINTED CIRCUIT SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2B |
| THREAD QUANTITY PER INCH | 56 |
| THREAD SERIES DESIGNATOR | UNC |
| THREADED DEVICE TYPE | MOUNTING HOLE |