|
|
|
National Stock Number:
5935-01-308-6654
Federal Supply Class:
5935
National Item Identification Number:
013086654
Description:
CLAMP,CABLE,ELECTRICAL CONNECTOR
Detail:
A clamp specifically designed to hold an electrical cable firmly in a connector. Must include provisions for attachment to an electrical connector. Excludes ADAPTER (1), CABLE TO CONNECTOR.
|
Manufacturer Information:
| M85049/39-11S | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M85049/39S11S | 0U583 | SAE INTERNATIONAL | | SAE-AS85049/39 | 0U583 | SAE INTERNATIONAL | | M85049/39S11S | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-85049/39 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY ANGLE IN DEG | 90.0 | | CABLE OPENING QUANTITY | 1 | | CABLE OPENING DIAMETER | 0.153 INCHES MINIMUM AND 0.234 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CONNECTOR END | 1.200 INCHES MAXIMUM | | DISTANCE FROM CENTERLINE TO CABLE END | 1.100 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING LOCATION NOT OTHERWISE SPECIFIED | | MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING | | NOMINAL THREAD LENGTH | 7.11 MILLIMETERS | | NOMINAL THREAD SIZE | 15.0 MILLIMETERS | | OVERALL WIDTH | 0.984 INCHES MAXIMUM | | SIZE DESIGNATION | 11 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-85049/39 GOVERNMENT SPECIFICATION | | STYLE DESIGNATOR | CLAMP, ANGLE TIE STRAP TYPE | | SURFACE TREATMENT | PASSIVATE | | TEST DATA DOCUMENT | 81349-MIL-C-85049 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD PITCH IN MILLIMETERS | 1.00 | | THREAD SERIES DESIGNATOR | ISO M | | THREAD TOLERANCE CLASS | 6G INTERNAL |
|
|