5935-01-327-9747 CONNECTOR,RECEPTACLE,ELECTRICAL Index 5320-01-327-9749 RIVET,SOLID

National Stock Number:
5935-01-327-9748

Federal Supply Class:
5935

National Item Identification Number:
013279748

Description:
CONNECTOR,RECEPTACLE,ELECTRICAL

Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.


Manufacturer Information:
357-7394-22013499ROCKWELL COLLINS, INC.
9025-9513-00719505RADIALL USA INC
SF2960-661895077SV MICROWAVE, INC.


Techincal Specification:
BODY STYLEANGLE SHAPE, EXTERNAL COUPLING
CONTACT POSITION ARRANGEMENT STYLESMA SINGLE MATING END
TERMINAL LOCATIONSIDE SINGLE MATING END SINGLE CONTACT GROUPING
TERMINAL TYPECRIMP SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL SOCKET SINGLE MATING END SINGLE CONTACT GROUPING
INCLUDED CONTACT QUANTITY1 SINGLE MATING END SINGLE CONTACT GROUPING
MATING END QUANTITY1
OVERALL LENGTH0.710 INCHES MINIMUM AND
0.750 INCHES MAXIMUM
BUSHING DIAMETER0.049 INCHES MINIMUM AND
0.051 INCHES MAXIMUM
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.332 INCHES MINIMUM AND
0.348 INCHES MAXIMUM
OVERALL HEIGHT0.739 INCHES MINIMUM AND
0.755 INCHES MAXIMUM
OVERALL WIDTH0.492 INCHES MINIMUM AND
0.508 INCHES MAXIMUM
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.332 INCHES MINIMUM AND
0.348 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO REAR FACE0.302 INCHES MINIMUM AND
0.318 INCHES MAXIMUM
FLANGE LENGTH0.492 INCHES MINIMUM AND
0.508 INCHES MAXIMUM
UNTHREADED MOUNTING HOLE DIAMETER0.095 INCHES MINIMUM AND
0.111 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
THREADED DEVICE TYPECOUPLING FACILITY
THREAD SERIES DESIGNATORUNS
NOMINAL THREAD SIZE0.250 INCHES
THREAD CLASS2A
THREAD QUANTITY PER INCH36
THREAD DIRECTIONRIGHT-HAND
SHELL TYPESOLID
SHELL MATERIALSTEEL COMP 303
SHELL MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763,CONDITION A FED SPEC SINGLE MATERIAL RESPONSE
SHELL SURFACE TREATMENTPASSIVATE
INSERT MATERIALPLASTIC POLYTETRAFLUOROETHYLENE SINGLE MATING END
INSERT MATERIAL DOCUMENT AND CLASSIFICATIONMIL-P-19468 MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END
CONTACT REMOVABILITYNONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MAXIMUM FREQUENCY RATING18.0 GIGAHERTZ SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIALCOPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-530,HALF HARD FED SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD AND
COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-G-45204,TY 1,GRADE C,CL 2 MIL SPEC 1ST TREATMENT RESPONSE AND
MIL-C-14550,CL 4 MIL SPEC 2ND TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND
VIBRATION RESISTANT AND
SHOCK RESISTANT
OPERATING TEMP RATING-55.0 DEG CELSIUS MINIMUM AND
125.0 DEG CELSIUS MAXIMUM
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.005 GOLD GRAINS, TROY
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACE GOLD


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us