| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.824 INCHES MINIMUM AND 0.844 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 12-12 SINGLE MATING END |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| FEATURES PROVIDED | PRE-TINNED TERMINAL |
| INSERT MATERIAL | PLASTIC SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 AND 101.0 AND 168.0 AND 211.0 AND 342.0 |
| MATING END QUANTITY | 1 |
| III BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| INCLUDED CONTACT QUANTITY | 12 SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.012 GOLD GRAINS, TROY |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL THREAD SIZE | 0.750 INCHES AND 0.875 INCHES |
| NOMINAL THREAD LENGTH | 0.290 INCHES |
| OPERATING TEMP RATING | -65.0 DEG CELSIUS MINIMUM AND 200.0 DEG CELSIUS MAXIMUM |
| OVERALL HEIGHT | 1.026 INCHES MINIMUM AND 1.036 INCHES MAXIMUM |
| OVERALL LENGTH | 1.540 INCHES MAXIMUM |
| OVERALL WIDTH | 1.026 INCHES MINIMUM AND 1.036 INCHES MAXIMUM |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5640 NATIONAL SPEC SINGLE MATERIAL RESPONSE |
| SHELL TYPE | SOLID |
| SHELL MATERIAL | STEEL COMP 303 |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | SOLDER WELL SINGLE MATING END SINGLE CONTACT GROUPING |
| THREAD CLASS | 2A AND 2A |
| THREAD DIRECTION | RIGHT-HAND AND RIGHT-HAND |
| THREAD QUANTITY PER INCH | 20 AND 20 |
| THREAD SERIES DESIGNATOR | UNEF AND UNEF |
| THREADED DEVICE TYPE | BACK SHELL AND COUPLING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.116 INCHES MINIMUM AND 0.125 INCHES MAXIMUM |