5935-01-331-9731 CONNECTOR,PLUG,ELECTRICAL Index 5935-01-331-9733 CONNECTOR,RECEPTACLE,ELECTRICAL

National Stock Number:
5935-01-331-9732

Federal Supply Class:
5935

National Item Identification Number:
013319732

Description:
ADAPTER,CONNECTOR

Detail:
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. It is not designed for permanent attachment to a cable, cord, coaxial line, or wire. The physical shape of an electrical connector should not be the determining factor of its name. Tee, angle, straight, and Y-shaped adapters are all ADAPTER, CONNECTOR. Excludes ADAPTER, CONNECTOR TO LAMPBASE; ADAPTER, LAMPHOLDER TO CONNECTOR; ADAPTER (1), CABLE CLAMP TO CONNECTOR; and ADAPTER, LAMPHOLDER. For items designed as a mechanical connection between an electrical conduit and an electrical connector, see ADAPTER (1), ELECTRICAL CONDUIT.


Manufacturer Information:
2225000K911-00000795DELTA ELECTRONICS MANUFACTURING CORP
85018037Z3DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS)
8501814FP-100795DELTA ELECTRONICS MANUFACTURING CORP
8501814FP-1037Z3DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS)
8501814FP-116236DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS)
8501814FP-126805TYCO ELECTRONICS CORP
8501814FP-174868AMPHENOL CORPORATION
8501814FP-195077SV MICROWAVE, INC.
8501814FP-196341COBHAM ADVANCED ELECTRONIC SOLUTIONS INC.


Techincal Specification:
DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE0.647 INCHES MAXIMUM
BODY STYLESTRAIGHT SHAPE W/FLANGE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT0.485 INCHES MINIMUM AND 0.515 INCHES MAXIMUM
CONNECTOR LOCKING METHODEXTERNALLY THREADED SHELL
CONTACT MATERIALCOPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM AC VOLTAGE RATING IN VOLTS335.0 ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT POSITION ARRANGEMENT STYLESMA 2ND MATING END
CONTACT POSITION ARRANGEMENT STYLETNC 1ST MATING END
CONTACT REMOVABILITYREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT MAXIMUM FREQUENCY RATING15.0 GIGAHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING
CONTACT SURFACE TREATMENTGOLD ALL MATING ENDS SINGLE CONTACT GROUPING AND COPPER ALL MATING ENDS SINGLE CONTACT GROUPING
ENVIRONMENTAL PROTECTIONVIBRATION RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND MOISTURE RESISTANT
INCLUDED CONTACT QUANTITY1 ALL MATING ENDS SINGLE CONTACT GROUPING
INCLUDED CONTACT TYPECOAXIAL SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING
INSERT MATERIALPLASTIC ALL MATING ENDS
NOMINAL THREAD SIZE0.438 INCHES AND 0.250 INCHES
OPERATING TEMP RATING-65.0 DEG CELSIUS MINIMUM AND 165.0 DEG CELSIUS MAXIMUM
OVERALL HEIGHT0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
OVERALL LENGTH1.070 INCHES MAXIMUM
OVERALL WIDTH0.735 INCHES MINIMUM AND 0.765 INCHES MAXIMUM
MATING END QUANTITY2
SHELL MATERIALSTEEL CORROSION RESISTING
SHELL SURFACE TREATMENTPASSIVATE
SHELL TYPESOLID
PRECIOUS MATERIAL AND LOCATIONCONTACT SURFACES GOLD
PRECIOUS MATERIALGOLD
PRECIOUS MATERIAL AND WEIGHT0.010 GOLD GRAINS, TROY
RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS50.0 ALL MATING ENDS SINGLE CONTACT GROUPING
THREAD CLASS2A AND 2A
THREAD DIRECTIONRIGHT-HAND AND RIGHT-HAND
THREAD QUANTITY PER INCH28 AND 36
THREAD SERIES DESIGNATORUNEF AND UNS
THREADED DEVICE TYPECOUPLING FACILITY
UNTHREADED MOUNTING HOLE DIAMETER0.110 INCHES MINIMUM AND 0.140 INCHES MAXIMUM


Click here to Register for Free 30-day Trial

© 2025 NSN-Now. All rights reserved.    Privacy Policy  |  Contact Us