|
|
|
National Stock Number:
5935-01-337-7089
Federal Supply Class:
5935
National Item Identification Number:
013377089
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
The main or principal part of a CONNECTOR, PLUG, ELECTRICAL which includes insert(s) designed to accommodate but does not include removable contacts. It may have a hood or shell, a jackscrew and jacksocket, or other means for polarizing and aligning. It is not designed to be mounted on a bulkhead, chassis, panel, wall, or the like. Excludes CONNECTOR BODY, MODULAR PLUG, ELECTRICAL. For items without insert(s), see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M28748/4-K5BL1L | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-28748/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-28748/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CABLE ENTRANCE DIAMETER | 0.550 INCHES MINIMUM | | CONNECTOR CABLE STRAIN RELIEF METHOD | CABLE CLAMP | | CONNECTOR LOCKING METHOD | JACKSCREW-SOCKET | | CONTACT POSITION ARRANGEMENT STYLE | 75 SINGLE MATING END | | ENVIRONMENTAL PROTECTION | HUMIDITY RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MIL-M-14,TY SDG-F MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-P-19833,TY GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE SINGLE MATING END | | INSERT MATERIAL | PLASTIC DIALLYL PHTHALATE GLASS FILLED SINGLE MATING END | | OVERALL HEIGHT | 2.515 INCHES NOMINAL | | OVERALL LENGTH | 3.384 INCHES NOMINAL | | OVERALL WIDTH | 1.450 INCHES NOMINAL | | MATING END QUANTITY | 1 | | NOMINAL THREAD LENGTH | 0.320 INCHES | | NOMINAL THREAD SIZE | 0.138 INCHES | | OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | POLARIZATION METHOD | JACKSCREW AND SHELL | | SHELL GUIDE TYPE AND LOCATION DESIGNATOR | B SLOT | | SHELL MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/8 FED SPEC SINGLE MATERIAL RESPONSE | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 1 OR 2 MIL SPEC SINGLE TREATMENT RESPONSE | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | ANODIZE | | SHELL TYPE | HOOD, SIDE OPENING | | SPECIAL FEATURES | BODY STYLE: HOOD, SIDE OPENING W/CLAMP | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-28748/4 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-C-28748 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A AND 2B | | THREAD SERIES DESIGNATOR | UNC | | THREAD QUANTITY PER INCH | 32 | | THREADED DEVICE TYPE | COUPLING FACILITY |
|
|