| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.785 INCHES MINIMUM AND 0.790 INCHES MAXIMUM |
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.500 INCHES NOMINAL |
| CONNECTOR LOCKING METHOD | BAYONET PIN |
| CONTACT POSITION ARRANGEMENT STYLE | 25-24 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204 MIL SPEC SINGLE TREATMENT RESPONSE SINGLE MATING END ALL CONTACT GROUPINGS |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END ALL CONTACT GROUPINGS |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.500 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND SALT WATER RESISTANT AND VIBRATION PROOF AND CORROSION RESISTANT AND DUST RESISTANT AND FUEL RESISTANT AND FUNGUS RESISTANT AND HUMIDITY RESISTANT AND OIL RESISTANT AND SHOCK RESISTANT AND THERMAL SHOCK RESISTANT AND VIBRATION RESISTANT |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END ALL CONTACT GROUPINGS |
| INCLUDED CONTACT QUANTITY | 12 SINGLE MATING END 1ST CONTACT GROUPING12 SINGLE MATING END 2ND CONTACT GROUPING |
| INSERT POSITION IN DEG | 95.0 AND 132.0 AND 232.0 AND 260.0 AND 334.0 |
| INSERT MATERIAL | PLASTIC EPOXY SINGLE MATING END |
| OVERALL HEIGHT | 1.792 INCHES MINIMUM AND 1.832 INCHES MAXIMUM |
| OVERALL LENGTH | 1.290 INCHES NOMINAL |
| OVERALL WIDTH | 1.792 INCHES MINIMUM AND 1.832 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD SIZE | 1.438 INCHES |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 175.0 CELSIUS MAXIMUM |
| POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.024 GOLD GRAINS, TROY |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 96906-MS27656 GOVERNMENT STANDARD |
| TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS |
| TERMINAL TYPE | CRIMP SINGLE MATING END ALL CONTACT GROUPINGS |
| TEST DATA DOCUMENT | 81349-MIL-C-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD CLASS | 2A |
| THREAD SERIES DESIGNATOR | UNEF |
| THREAD QUANTITY PER INCH | 18 |
| THREADED DEVICE TYPE | BACK SHELL |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.142 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |