| BODY STYLE | STRAIGHT SHAPE W/FLANGE |
| OVERALL LENGTH | 0.980 INCHES MINIMUM AND |
| 1.105 INCHES MAXIMUM |
| OVERALL HEIGHT | 0.660 INCHES MINIMUM AND |
| 0.705 INCHES MAXIMUM |
| OVERALL WIDTH | 0.660 INCHES MINIMUM AND |
| 0.705 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 0.490 INCHES MINIMUM AND |
| 0.510 INCHES MAXIMUM |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.490 INCHES MINIMUM AND |
| 0.510 INCHES MAXIMUM |
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.635 INCHES MINIMUM AND |
| 0.672 INCHES MAXIMUM |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND |
| 0.130 INCHES MAXIMUM |
| CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| THREADED DEVICE TYPE | COUPLING FACILITY |
| THREAD SERIES DESIGNATOR | UNS AND |
| UNEF |
| NOMINAL THREAD SIZE | 0.250 INCHES AND |
| 0.438 INCHES |
| THREAD CLASS | 2A |
| THREAD QUANTITY PER INCH | 36 AND |
| 28 |
| THREAD DIRECTION | RIGHT-HAND |
| SHELL TYPE | SOLID |
| SHELL MATERIAL | STEEL CORROSION RESISTING |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | ASTM A 582,TYPE 303,CONDITION A ASSN STD SINGLE MATERIAL RESPONSE |
| SHELL SURFACE TREATMENT | PASSIVATE |
| SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35,TYPE IV FED SPEC SINGLE TREATMENT RESPONSE |
| MATING END QUANTITY | 2 |
| CONTACT POSITION ARRANGEMENT STYLE | SMA 1ST MATING END |
| TNC 2ND MATING END |
| INSERT MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE ALL MATING ENDS |
| INSERT MATERIAL DOCUMENT AND CLASSIFICATION | ASTM D 1457 ASSN STD SINGLE MATERIAL RESPONSE OR |
| ASTM D 1710 ASSN STD SINGLE MATERIAL RESPONSE ALL MATING ENDS |
| INCLUDED CONTACT QUANTITY | 1 1ST MATING END SINGLE CONTACT GROUPING |
| 1 2ND MATING END SINGLE CONTACT GROUPING |
| CONTACT REMOVABILITY | NONREMOVABLE ALL MATING ENDS SINGLE CONTACT GROUPING |
| INCLUDED CONTACT TYPE | COAXIAL SOCKET ALL MATING ENDS SINGLE CONTACT GROUPING |
| RADIO FREQUENCY TYPE CONTACT CHARACTERISTIC IMPEDANCE IN OHMS | 50.0 ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT MAXIMUM FREQUENCY RATING | 18.0 GIGAHERTZ ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT MATERIAL | COPPER ALLOY ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-530 FED SPEC SINGLE MATERIAL RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD ALL MATING ENDS SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-G-45204,TYPE II,CLASS 2 MIL SPEC SINGLE TREATMENT RESPONSE ALL MATING ENDS SINGLE CONTACT GROUPING |
| ENVIRONMENTAL PROTECTION | CORROSION RESISTANT AND |
| MOISTURE RESISTANT AND |
| THERMAL SHOCK RESISTANT AND |
| VIBRATION RESISTANT AND |
| SHOCK RESISTANT |
| OPERATING TEMP RATING | -65.0 DEG CELSIUS MINIMUM AND |
| 165.0 DEG CELSIUS MAXIMUM |
| PRECIOUS MATERIAL | GOLD |
| PRECIOUS MATERIAL AND WEIGHT | 0.010 GOLD GRAINS, TROY |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |