|
|
|
National Stock Number:
5935-01-360-6605
Federal Supply Class:
5935
National Item Identification Number:
013606605
Description:
DUMMY CONNECTOR,RECEPTACLE
Detail:
An item specifically designed to mate with a plug connector to perform one or more special functions, such as to support a plug connector when not in use, short contacts, or open or close electrical circuits, in or on another connector. It does not have provisions for attaching a wire, cable, or contact. It is designed to mount on a panel, bulkhead, wall, or chassis. It does not include connector shells which are merely used to position a plug connector on a panel.
|
Manufacturer Information:
| 5935PL0666226 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 650HS010NF15 | 06324 | GLENAIR, INC. | | D38999/22DW | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-38999/22 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-38999/22 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 20.9 MILLIMETERS MINIMUM AND 21.4 MILLIMETERS MAXIMUM | | BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 23.01 MILLIMETERS MINIMUM AND 24.61 MILLIMETERS MAXIMUM | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 23.01 MILLIMETERS MINIMUM AND 24.61 MILLIMETERS MAXIMUM | | OVERALL HEIGHT | 30.7 MILLIMETERS MINIMUM AND 31.3 MILLIMETERS MAXIMUM | | OVERALL LENGTH | 23.4 MILLIMETERS NOMINAL | | OVERALL WIDTH | 30.7 MILLIMETERS MINIMUM AND 31.3 MILLIMETERS MAXIMUM | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 1.000 INCHES | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 FED SPEC SINGLE TREATMENT RESPONSE | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL TYPE | SOLID | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-3999/22 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-C-38999/22 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD CLASS | 2A | | THREAD SERIES DESIGNATOR | UNEF | | THREAD QUANTITY PER INCH | 10 | | THREADED DEVICE TYPE | COUPLING FACILITY |
|
|