|
|
|
National Stock Number:
5935-01-463-5317
Federal Supply Class:
5935
National Item Identification Number:
014635317
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 86102 | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 86102 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 86102-18-A-70M | 037Z3 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (DRAWINGS) | | 86102-18-A-70M | 0BTU6 | TTI INC. DIV GOVERNMENT SALES | | 86102-18-A-70M | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 86102-18-A-70M | 95238 | WINCHESTER INTERCONNECT CORPORATION | | SPEG102Z-18-A70-MIL | 0AKZ5 | CRANE ELECTRONICS INC |
|
Techincal Specification:
| BODY HEIGHT | 0.100 INCHES NOMINAL | | BODY STYLE | RIGHT ANGLE TYPE | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT POSITION ARRANGEMENT STYLE | 72 ALL MATING ENDS | | CONTACT MAXIMUM CURRENT RATING IN AMPS | 3.0 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT QUANTITY | 70 SINGLE MATING END SINGLE CONTACT GROUPING | | OVERALL LENGTH | 3.500 INCHES NOMINAL | | OVERALL WIDTH | 0.220 INCHES NOMINAL | | MATING END QUANTITY | 2 | | OPERATING TEMP RATING | -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM | | PRECIOUS MATERIAL AND LOCATION | CONTACT PLATING GOLD | | PRECIOUS MATERIAL | GOLD | | SPECIAL FEATURES | CONTACT ARRANGEMENT SELECTED SHOULD BE FOR TWO ROWS OF 35 TO EQUAL 70; CURRENT RATING 3 AMPS CONTINUOUS TO 5 AMPS MAXIMUM; DIELECTRIC WITHSTANDING VOLTAGE: 1,000 VOLTS RMS (SEA LEVEL); INSULATION RESISTANCE: 5,000 MEGOHMS; MATERIALS: CONTACT 3/4 HARD PHOSPHOR BRONZE; CONTACT PLATING 50 MICROINCHES GOLD; INSULATOR: GLASS FILLED THERMOPLASTIC NYLON | | TERMINAL LOCATION | SIDE AND FRONT SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | PRINTED CIRCUIT SINGLE MATING END SINGLE CONTACT GROUPING | | TEST DATA DOCUMENT | 16236-86102 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
|
|