|
|
|
National Stock Number:
5935-01-465-0871
Federal Supply Class:
5935
National Item Identification Number:
014650871
Description:
CONNECTOR BODY,RECEPTACLE,ELECTR
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| M81511/51WF01A3 | 0U583 | SAE INTERNATIONAL | | M81511/51WF01A3 | 11139 | TE CONNECTIVITY CORPORATION | | M81511/51WF01A3 | 77820 | AMPHENOL CORP | | M81511/51WF01A3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | SAE-AS81511/51 | 0U583 | SAE INTERNATIONAL |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.765 INCHES MINIMUM AND 0.775 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | BAYONET PIN | | CONTACT POSITION ARRANGEMENT STYLE | 18-85 SINGLE MATING END | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.123 INCHES NOMINAL | | ENVIRONMENTAL PROTECTION | DUST RESISTANT | | FEATURES PROVIDED | GROUNDED CONTACT | | GUIDE DESIGN AND LOCATION | V GROOVE PIN CENTER AT 12 OCLOCK | | INSERT MATERIAL | PLASTIC SINGLE MATING END | | INSERT POSITION IN DEG | 120.0 | | INSERT MATERIAL DOCUMENT AND CLASSIFICATION | MS3160 MIL SPEC ALL MATERIAL RESPONSES SINGLE MATING END | | OVERALL HEIGHT | 1.335 INCHES MINIMUM AND 1.351 INCHES MAXIMUM | | OVERALL LENGTH | 1.167 INCHES MINIMUM AND 1.187 INCHES MAXIMUM | | OVERALL WIDTH | 1.455 INCHES MINIMUM AND 1.475 INCHES MAXIMUM | | MATING END QUANTITY | 1 | | NOMINAL THREAD SIZE | 1.125 INCHES | | POLARIZATION METHOD | CONTACT | | SHELL GUIDE TYPE AND LOCATION DESIGNATOR | B SLOT | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | NICKEL | | SPECIAL TEST FEATURES | THE ESTABLISHMENT AND MAINTENANCE OF A CALIBRATION SYSTEM TO CONTROLTHE ACCURACY OF THE MEASURING AND TEST EQUIPMENT SHALL BE IN ACCORDANCE WITH MIL-STD-45662 | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-81511/51 GOVERNMENT STANDARD | | SPECIAL FEATURES | REMOVABLE CRIMP CONTACTS NOT INCLUDED IN WEIGHT | | TEST DATA DOCUMENT | 81349-MIL-C-81511 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD CLASS | 2A | | THREAD PITCH IN MILLIMETERS | 1.0 | | THREAD QUANTITY PER INCH | 28 | | THREAD TOLERANCE CLASS | 2A EXTERNAL | | THREADED DEVICE TYPE | BACK SHELL | | THREAD SERIES DESIGNATOR | UN |
|
|