|
|
|
National Stock Number:
5935-01-478-0507
Federal Supply Class:
5935
National Item Identification Number:
014780507
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 05A107 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 05A107T25B29PA | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 88-559239-29E | 77820 | AMPHENOL CORP |
|
Techincal Specification:
| MATING END QUANTITY | 1 | | CONTACT POSITION ARRANGEMENT STYLE | 25-29 SINGLE MATING END | | INCLUDED CONTACT QUANTITY | 29 SINGLE MATING END SINGLE CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING | | TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING | | BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING | | OVERALL LENGTH | 1.234 INCHES MAXIMUM | | OVERALL DIAMETER | 1.891 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | BAYONET LATCH | | THREADED DEVICE TYPE | BACK SHELL | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 1.438 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 18 | | THREAD DIRECTION | RIGHT-HAND | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 16.0 | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING | | CONTACT SURFACE TREATMENT | COPPER AND | | SILVER SINGLE MATING END SINGLE CONTACT GROUPING | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND | | SALT WATER RESISTANT AND | | VIBRATION PROOF | | TEST DATA DOCUMENT | 81349-MS27467 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND | | 76823-05A107 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | PRECIOUS MATERIAL | GOLD AND | | SILVER | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD AND | | CONTACT SURFACES SILVER | | CRITICALITY CODE JUSTIFICATION | AGAV | | SPECIAL FEATURES | SHELL TO SHELL CONDUCTIVITY SHALL BE ONE MILLIOHM MAXIMUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-38999 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 1W025 | | MFR SOURCE CONTROLLING REFERENCE | 05A107T25B29PA |
|
|