|
|
|
National Stock Number:
5935-01-478-2662
Federal Supply Class:
5935
National Item Identification Number:
014782662
Description:
CONNECTOR,PLUG,ELECTRICAL
Detail:
An electrical fitting with electrical contacts, constructed to be affixed to the end of a cable, conduit, coaxial line, cord or wiring for convenience in joining with other electrical connector(s) or PRINTED WIRING BOARD and is not designed to be mounted on a bulkhead, chasses, panel, PRINTED WIRING BOARD, or the like. Excludes JACK, TELEPHONE; JACK, TIP; PLUG, TELEPHONE; PLUG TIP; INSERT, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified); and SOCKET, PLUG-IN, ELECTRONIC COMPONENTS. See also LEAD ASSEMBLY, ELECTRICAL; WIRING HARNESS (as modified); and CABLE ASSEMBLY (as modified). For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| 05A108 | 76823 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | 05A108WJ24SA | 1W025 | NORTHROP GRUMMAN SYSTEMS CORP | | 88-559249-24H | 77820 | AMPHENOL CORP |
|
Techincal Specification:
| MATING END QUANTITY | 1 | | CONTACT POSITION ARRANGEMENT STYLE | 25-24 SINGLE MATING END | | INCLUDED CONTACT QUANTITY | 12 SINGLE MATING END 1ST CONTACT GROUPING | | 12 SINGLE MATING END 2ND CONTACT GROUPING | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS | | TERMINAL TYPE | CRIMP SINGLE MATING END ALL CONTACT GROUPINGS | | TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS | | BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING | | OVERALL LENGTH | 33.16 MILLIMETERS MAXIMUM | | OVERALL DIAMETER | 48.0 MILLIMETERS MAXIMUM | | THREAD PITCH IN MILLIMETERS | 1.00 | | CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING | | THREADED DEVICE TYPE | BACK SHELL AND | | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | ISO M AND | | SPECIAL ACME | | NOMINAL THREAD SIZE | 37.0 MILLIMETERS AND | | 1.625 INCHES | | THREAD CLASS | 2B | | THREAD TOLERANCE CLASS | 6G EXTERNAL | | THREAD QUANTITY PER INCH | 10 | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD LENGTH | 7.11 MILLIMETERS | | SHELL TYPE | SOLID | | SHELL MATERIAL | ALUMINUM ALLOY | | SHELL SURFACE TREATMENT | CADMIUM | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 0.0 AND | | 135.0 AND | | 170.0 AND | | 200.0 AND | | 310.0 | | INSERT MATERIAL | PLASTIC EPOXY SINGLE MATING END | | CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT MATERIAL | GOLD SINGLE MATING END ALL CONTACT GROUPINGS | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND | | SALT WATER RESISTANT AND | | VIBRATION PROOF AND | | CORROSION RESISTANT AND | | DUST RESISTANT AND | | FUEL RESISTANT AND | | FUNGUS RESISTANT AND | | HUMIDITY RESISTANT AND | | OIL RESISTANT AND | | SHOCK RESISTANT AND | | THERMAL SHOCK RESISTANT AND | | VIBRATION RESISTANT | | TEST DATA DOCUMENT | 81349-D38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND | | 76823-05A108 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD | | CRITICALITY CODE JUSTIFICATION | FEAT | | SPECIAL FEATURES | PER D38999/26 CLASS W EXCEPT THE SHELL TO SHELL CONDUCTIVITY SHALL BE ON MILLIOHM MAX IN LIEU OF 2.5 MILLIOHMMAX AS STATED IN DETAIL | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-38999 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 1W025 | | MFR SOURCE CONTROLLING REFERENCE | 05A108WJ24SA |
|
|