|
|
|
National Stock Number:
5935-01-482-4166
Federal Supply Class:
5935
National Item Identification Number:
014824166
Description:
COVER,ELECTRICAL CONNECTOR
Detail:
A device specifically designed to fully or partially inclose an electrical connector to protect its mating end from mechanical damage. Excludes CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and GUARD, ELECTRICAL CONNECTOR. See also COVER AND GUARD, ELECTRICAL CONNECTOR; SHELL, ELECTRICAL CONNECTOR; and SHIELD, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| D38999/33J25R | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-C-38999/33 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-38999/33 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MOUNTING FACILITY TYPE AND QUANTITY | 1 THREADED COUPLING AND | | 1 SCREW | | STYLE DESIGNATOR | INTERNAL THREAD W/CHAIN OR ROPE | | BODY HEIGHT | 23.0 MILLIMETERS MAXIMUM | | OVERALL DIAMETER | 49.0 MILLIMETERS MAXIMUM | | NOMINAL THREAD SIZE | 1.625 INCHES | | THREAD CLASS | 2B | | FURNISHED ITEMS | COVER W/WIRE ROPE | | ATTACHMENT FEATURE LENGTH | 120.0 MILLIMETERS MINIMUM AND | | 140.0 MILLIMETERS MAXIMUM | | EYE INSIDE DIAMETER | 4.11 MILLIMETERS MINIMUM AND | | 4.49 MILLIMETERS MAXIMUM | | SEAL TYPE | GASKET | | SEAL MATERIAL | RUBBER, SILICONE BASE | | SIZE DESIGNATION | 25 | | TEST DATA DOCUMENT | 81349-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | SPECIAL FEATURES | COVER MATERIAL IS HIGH PERFORMANCE RESIN; ROPE IS INSULATED STAINLESS STEEL; ROPE INSULATION SHALL WITHSTAND 200.0 DEG. C. ENVIRONMENT; FASTENER IS STAINLESS STEEL; FASTENER TENSILE STRENGTH 25.0 POUNDS; MOISTURE AND CORROSION RESISTANT | | SPECIFICATION/STANDARD DATA | 81349-MIL-C-38999/33 GOVERNMENT SPECIFICATION | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | D38999/33J25R | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-DTL-38999/33 |
|
|