| BODY STYLE | STRAIGHT SHAPE, INTERNAL COUPLING |
| CONNECTOR LOCKING METHOD | INTERNALLY THREADED COUPLING RING |
| CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT POSITION ARRANGEMENT STYLE | 19-30 SINGLE MATING END |
| CONTACT REMOVABILITY | REMOVABLE SINGLE MATING END SINGLE CONTACT GROUPING |
| CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END SINGLE CONTACT GROUPING |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT AND VIBRATION RESISTANT AND SALT WATER RESISTANT |
| INCLUDED CONTACT TYPE | ROUND PIN SINGLE MATING END SINGLE CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 1 SINGLE MATING END 2ND CONTACT GROUPING |
| INCLUDED CONTACT QUANTITY | 29 SINGLE MATING END 1ST CONTACT GROUPING |
| INSERT MATERIAL | PLASTIC EPOXY SINGLE MATING END |
| INSERT POSITION IN DEG | 0.0 AND 18.0 AND 95.0 AND 140.0 AND 228.0 AND 255.0 |
| OVERALL DIAMETER | 1.516 INCHES MAXIMUM |
| OVERALL LENGTH | 1.234 INCHES MAXIMUM |
| MATING END QUANTITY | 1 |
| NOMINAL THREAD LENGTH | 0.219 INCHES |
| NOMINAL THREAD SIZE | 1.062 INCHES |
| OPERATING TEMP RATING | -65.0 CELSIUS MINIMUM AND 175.0 CELSIUS MAXIMUM |
| POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | GOLD |
| SHELL MATERIAL | ALUMINUM ALLOY |
| SHELL MATERIAL DOCUMENT AND CLASSIFICATION | A000 FED STD 3RD MATERIAL RESPONSE |
| SHELL SURFACE TREATMENT | CADMIUM |
| SHELL TYPE | SOLID |
| SPECIFICATION/STANDARD DATA | 81349-MIL-C-38999 GOVERNMENT SPECIFICATION |
| SPECIAL FEATURES | SHELL TO SHELL CONDUCTIVITY SHALL BE ONE MILLIOHM MAXIMUM |
| TERMINAL LOCATION | BACK SINGLE MATING END SINGLE CONTACT GROUPING |
| TERMINAL TYPE | CRIMP SINGLE MATING END SINGLE CONTACT GROUPING |
| TEST DATA DOCUMENT | 81349-D38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 76823-05A107 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD SERIES DESIGNATOR | UNEF |
| THREADED DEVICE TYPE | BACK SHELL |