|
|
|
National Stock Number:
5935-01-497-2028
Federal Supply Class:
5935
National Item Identification Number:
014972028
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| MIL-C-5015 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS3402DS18-1S | 0U583 | SAE INTERNATIONAL | | SAE-AS50151 | 0U583 | SAE INTERNATIONAL | | MS3402DS18-1S | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| BODY STYLE | STRAIGHT SHAPE, EXTERNAL COUPLING | | CONTACT POSITION ARRANGEMENT STYLE | 18-1 SINGLE MATING END | | TERMINAL LOCATION | BACK SINGLE MATING END ALL CONTACT GROUPINGS | | TERMINAL TYPE | CRIMP SINGLE MATING END ALL CONTACT GROUPINGS | | INCLUDED CONTACT TYPE | ROUND SOCKET SINGLE MATING END ALL CONTACT GROUPINGS | | INCLUDED CONTACT QUANTITY | 10 SINGLE MATING END 1ST CONTACT GROUPING | | MATING END QUANTITY | 1 | | OVERALL LENGTH | 1.662 INCHES MAXIMUM | | OVERALL HEIGHT | 1.375 INCHES NOMINAL | | OVERALL WIDTH | 1.375 INCHES NOMINAL | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | 1.062 INCHES NOMINAL | | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 1.062 INCHES NOMINAL | | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 0.750 INCHES MINIMUM AND | | 0.781 INCHES MAXIMUM | | UNTHREADED MOUNTING HOLE DIAMETER | 0.115 INCHES MINIMUM AND | | 0.130 INCHES MAXIMUM | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | THREADED DEVICE TYPE | COUPLING FACILITY | | THREAD SERIES DESIGNATOR | UNEF | | NOMINAL THREAD SIZE | 1.125 INCHES | | THREAD CLASS | 2A | | THREAD QUANTITY PER INCH | 18 | | THREAD DIRECTION | RIGHT-HAND | | NOMINAL THREAD LENGTH | 0.625 INCHES | | SHELL TYPE | SOLID | | SHELL MATERIAL | STEEL CORROSION RESISTING | | SHELL SURFACE TREATMENT | CADMIUM | | SHELL SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2, CL 3 FED SPEC SINGLE TREATMENT RESPONSE | | POLARIZATION METHOD | KEYWAY OR MULTIPLE KEYWAY | | INSERT POSITION IN DEG | 0.0 | | INSERT MATERIAL | SILICON SINGLE MATING END | | CONTACT MATERIAL | COPPER ALLOY SINGLE MATING END ALL CONTACT GROUPINGS | | CONTACT SURFACE TREATMENT | GOLD SINGLE MATING END ALL CONTACT GROUPINGS | | ENVIRONMENTAL PROTECTION | MOISTURE PROOF AND | | SALT WATER RESISTANT AND | | VIBRATION PROOF | | PRECIOUS MATERIAL | GOLD | | PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES GOLD |
|
|