|
|
|
National Stock Number:
5935-01-502-5883
Federal Supply Class:
5935
National Item Identification Number:
015025883
Description:
CONNECTOR,RECEPTACLE,ELECTRICAL
Detail:
An electrical fitting with electrical contacts constructed to be affixed to the end of a cable, conduit, coaxial line, cord, wire (includes printed/etched), PRINTED WIRING BOARD, or the like for convenience in joining with another electrical connector(s) or PRINTED WIRING BOARD. It is designed to be mounted on a bulkhead, chassis, panel, wall, PRINTED WIRING BOARD, or the like. Excludes LAMPHOLDER; JACK, TELEPHONE; JACK, TIP; INSERT ELECTRICAL CONNECTOR; INSERT MODULE, ELECTRICAL CONNECTOR; CONNECTOR BODY (as modified) and SOCKET, PLUG-IN ELECTRONIC COMPONENTS. See also WIRING HARNESS (as modified) and CABLE ASSEMBLY (as modified). For items with termination wires of more than four inches in length, see LEAD ASSEMBLY, ELECTRICAL. For items without inserts, see SHELL, ELECTRICAL CONNECTOR.
|
Manufacturer Information:
| D38999/24JD35PN | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-38999 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-DTL-38999/24 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | 22.6 MILLIMETERS MAXIMUM | | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL | | OVERALL DIAMETER | 41.0 MILLIMETERS MINIMUM AND 41.6 MILLIMETERS MAXIMUM | | OVERALL LENGTH | 32.5 MILLIMETERS MAXIMUM | | MATING END QUANTITY | 1 | | MOUNTING FACILITY THICKNESS | 1.58 MILLIMETERS MINIMUM AND 3.20 MILLIMETERS MAXIMUM | | NOMINAL THREAD SIZE | 28.0 MILLIMETERS | | SHELL SURFACE TREATMENT | CADMIUM | | SPECIFICATION/STANDARD DATA | 81349-MIL-DTL-38999 GOVERNMENT SPECIFICATION | | TEST DATA DOCUMENT | 81349-MIL-DTL-38999 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | ISO M | | THREAD PITCH IN MILLIMETERS | 1.00 | | THREAD TOLERANCE CLASS | 6G EXTERNAL | | THREADED DEVICE TYPE | COUPLING FACILITY |
|
|