|
|
|
National Stock Number:
5940-00-316-1112
Federal Supply Class:
5940
National Item Identification Number:
003161112
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| CR151B66 | 02295 | GENERAL ELECTRIC CO GENERAL PURPOSE CONTROL DEPT |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.625 INCHES | | BASE THICKNESS | 0.660 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITH INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 1.160 INCHES | | BOARD OVERALL HEIGHT | 1.160 INCHES | | BOARD OVERALL LENGTH | 3.500 INCHES | | BOARD OVERALL WIDTH | 1.625 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.250 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.562 INCHES | | CURRENT RATING IN AMPS | 30.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 600.0 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.812 INCHES | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.750 INCHES | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC PHENOLIC BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.175 INCHES | | NONFEEDTHRU TERMINAL QUANTITY | 6 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 605 SINGLE | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 2 |
|
|