|
|
|
National Stock Number:
5940-00-372-4644
Federal Supply Class:
5940
National Item Identification Number:
003724644
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 2200B | 81312 | WINCHESTER INTERCONNECT CORPORATION | | 2200B1 | 81312 | WINCHESTER INTERCONNECT CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.125 INCHES | | BOARD CONSTRUCTION | SCORED FOR EASY BREAKING INTO SMALLER TERMINAL BOARDS | | BOARD OVERALL LENGTH | 7.810 INCHES | | BOARD OVERALL WIDTH | 0.750 INCHES | | BOARD THICKNESS | 0.062 INCHES | | BODY STYLE | STRIP TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.312 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.500 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.218 INCHES | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.500 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.125 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | LO-P-513,TYPE PBE FED STD SINGLE MATERIAL RESPONSE BOARD | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-626,COMP 22,1/2H FED SPEC SINGLE MATERIAL RESPONSE TERMINALS | | MATERIAL | COPPER ALLOY 360 TERMINALS | | MATERIAL | PLASTIC PHENOLIC AND RESIN SILICONE BOARD | | MOUNTING HOLE DIAMETER | 0.062 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | NONFEEDTHRU TERMINAL QUANTITY | 50 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 433 SINGLE | | PRECIOUS MATERIAL AND LOCATION | TERMINALS SILVER | | PRECIOUS MATERIAL AND WEIGHT | 0.040 SILVER GRAINS, TROY | | PRECIOUS MATERIAL | SILVER | | SECTION QUANTITY | 5 | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-S-365,TYPE 3 FED SPEC SINGLE TREATMENT RESPONSE TERMINALS | | SURFACE TREATMENT | SILVER TERMINALS | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL QUANTITY PER SECTION | 10 | | TERMINAL ROW QUANTITY | 2 |
|
|