|
|
|
National Stock Number:
5940-00-464-0274
Federal Supply Class:
5940
National Item Identification Number:
004640274
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 675728-1 | 22525 | INSTRUMENTS AND FLIGHT RESEARCH INC. |
|
Techincal Specification:
| BODY STYLE | STRIP TYPE | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MATERIAL | PLASTIC MELAMINE AND | | GLASS BOARD | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-15037,TYPE GME MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | BOARD OVERALL LENGTH | 5.500 INCHES | | BOARD OVERALL WIDTH | 3.438 INCHES | | BOARD THICKNESS | 0.125 INCHES | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 2 | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 2.937 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 1.312 INCHES | | TERMINAL DESIGN | NONFEEDTHRU | | NONFEEDTHRU TERMINAL TYPE | 435 SINGLE | | NONFEEDTHRU TERMINAL QUANTITY | 8 SINGLE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.937 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.937 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.250 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.281 INCHES | | MOUNTING HOLE DIAMETER | 0.171 INCHES | | SPECIAL FEATURES | SPECIAL REQUIREMENTS FOR NUCLEARPROPULSION PLANT EQUIPMENT CONTAINED IN IRPOD IC NO.C1710A LINE NO. 0052 | | SPECIAL MARKINGS | C1 THRU C4 | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY THE SPECIAL FEATUREREQUIREMENT | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 22525 | | DESIGN CONTROL REFERENCE | 675728-1 |
|
|