5950-00-518-2909 TRANSFORMER,POWER Index 5940-00-518-2921 TERMINAL BOARD

National Stock Number:
5940-00-518-2920

Federal Supply Class:
5940

National Item Identification Number:
005182920

Description:
TERMINAL BOARD

Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.


Manufacturer Information:
0370-556232LOCKHEED MARTIN CORPORATION


Techincal Specification:
BODY STYLEBARRIER TYPE
BOARD CONSTRUCTIONHOLLOW CONSTRUCTION WITHOUT INSULATED STRIP
MOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE
MATERIALPLASTIC BOARD
COPPER ALLOY 210 TERMINALS
SURFACE TREATMENTNICKEL ALLOY TERMINALS
BOARD OVERALL LENGTH1.750 INCHES
BOARD OVERALL WIDTH0.625 INCHES
BOARD OVERALL HEIGHT0.312 INCHES
BOARD HEIGHT EXCLUDING TERMINALS0.312 INCHES
BASE THICKNESS0.219 INCHES
TERMINAL PATTERN ARRANGEMENTMULTI-ROW
TERMINAL ROW QUANTITY2
DISTANCE BETWEEN TERMINAL ROW CENTERS0.250 INCHES
CENTER TO CENTER DISTANCE BETWEEN TERMINALS0.250 INCHES
TERMINAL DESIGNLINKED NONFEEDTHRU
NONFEEDTHRU TERMINAL TYPE859 SINGLE
NONFEEDTHRU TERMINAL QUANTITY5 SINGLE
TERMINAL CONNECTING LINK TYPE1 SINGLE
TERMINAL CONNECTING LINK QUANTITY5 SINGLE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH1.500 INCHES
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH0.250 INCHES
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE0.188 INCHES
DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY0.125 INCHES
MOUNTING HOLE DIAMETER0.125 INCHES
CURRENT RATING IN AMPS5.0
DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS1000.0
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSAS DIFFERENTIATED BY MIL-Q-21549B-SP24-1
THE MANUFACTURERS DATA
MANUFACTURERS CODE56232
DESIGN CONTROL REFERENCE0370-5


Click here to Register for Free 30-day Trial