|
|
|
National Stock Number:
5940-00-928-2120
Federal Supply Class:
5940
National Item Identification Number:
009282120
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 1849362 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER |
|
Techincal Specification:
| BODY STYLE | BLOCK TYPE | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MATERIAL | PLASTIC PHENOLIC AND | | PAPER BOARD | | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-513,TYPE PBE FED SPEC SINGLE MATERIAL RESPONSE BOARD | | BOARD OVERALL LENGTH | 7.680 INCHES | | BOARD OVERALL WIDTH | 7.520 INCHES | | BOARD OVERALL HEIGHT | 5.562 INCHES | | BOARD THICKNESS | 0.188 INCHES | | NONFEEDTHRU TERMINAL TYPE | 442 SINGLE | | NONFEEDTHRU TERMINAL QUANTITY | 48 SINGLE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 5.562 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 6.760 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.380 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.560 INCHES | | MOUNTING HOLE DIAMETER | 0.242 INCHES | | SPECIAL MARKINGS | R72 R73 C20 C28 CR22 CR27 CC29 R27 CR63 CR29 CR13 CR68 C21 C61 R9 R76 CR64 CR23 CR52 CR28 C49 C50 C62 R53 |
|
|