|
|
|
National Stock Number:
5940-00-949-3105
Federal Supply Class:
5940
National Item Identification Number:
009493105
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 699-JJ-07 | 26405 | REGAL BELOIT AMERICA, INC | | 699JJ7 | 83330 | DIALIGHT CORPORATION |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.156 INCHES | | BASE THICKNESS | 0.312 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.500 INCHES | | BOARD OVERALL HEIGHT | 0.500 INCHES | | BOARD OVERALL LENGTH | 3.812 INCHES | | BOARD OVERALL WIDTH | 0.688 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.500 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.438 INCHES | | CURRENT RATING IN AMPS | 20.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3.3 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.250 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | PLASTIC DIALLYL PHTHALATE AND GLASS FIBER BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.175 INCHES | | NONFEEDTHRU TERMINAL QUANTITY | 7 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 857 SINGLE | | SURFACE TREATMENT | NICKEL TERMINALS | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 |
|
|