|
|
|
National Stock Number:
5940-00-949-5915
Federal Supply Class:
5940
National Item Identification Number:
009495915
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| A25A209-016-103 | 99696 | LOCKHEED MARTIN CORPORATION DIV LOCKHEED MARTIN SYSTEMS & GLOBAL SOLUTIONS | | GT802H-10 | 26512 | NORTHROP GRUMMAN SYSTEMS CORPORATION | | MTB-10TMGD | 95238 | WINCHESTER INTERCONNECT CORPORATION | | MTB10TM | 95238 | WINCHESTER INTERCONNECT CORPORATION |
|
Techincal Specification:
| DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.110 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.125 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD OVERALL LENGTH | 2.156 INCHES | | BOARD OVERALL WIDTH | 0.219 INCHES | | BOARD THICKNESS | 0.125 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.906 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.171 INCHES | | CURRENT RATING IN AMPS | 7.5 | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC BOARD | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE DIAMETER | 0.125 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | NONFEEDTHRU TERMINAL QUANTITY | 10 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 434 SINGLE | | SURFACE TREATMENT | TIN TERMINALS | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 |
|
|