5940-00-950-7781, TERMINAL BOARD

National Stock Number:
5940-00-950-7781

Federal Supply Class:
5940

National Item Identification Number:
009507781

Description:
TERMINAL BOARD

Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.

Manufacturer Information:

12088-899-1	94756	THE BOEING COMPANY
5940PL1620504	9009H	INSPEKTORAT WSPARCIA SIL ZBROJNYCH
717701110	04939	LOCKHEED MARTIN CORPORATION
AS27212	0U583	SAE INTERNATIONAL
AS27212	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
AN3436-10-4	88044	AERONAUTICAL STANDARDS GROUP DEPT OF NAVY AND AIR FORCE
MS212-5-3	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS25123-5-3	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS25123-5-5	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS25123-5-8	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27212&5&6	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27212-5-1	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27212-5-2	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
LS6456-10-3	98897	LOCKHEED MARTIN CORP
MS27212-5-8	0U583	SAE INTERNATIONAL
SV809020 ITEM 4	73030	HAMILTON SUNDSTRAND CORPORATION
SAE-AS27212	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
MS27212-5-8	81343	SOCIETY OF AUTOMOTIVE ENGINEERS INC
MS27212-5-4	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27212-5-5	81349	MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SV809020 ITEM 4	81412	TREADWELL CORPORATION (DELAWARE)
MS27212-5-7	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27212-5-4H	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27212-5-8	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
MS27212-5-8	A9271	GORIZIANE GROUP SPA

Techincal Specification:

DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY	0.312 INCHES
BASE THICKNESS	0.455 INCHES
BOARD CONSTRUCTION	HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP
BOARD HEIGHT EXCLUDING TERMINALS	1.297 INCHES
BOARD OVERALL HEIGHT	1.517 INCHES
BOARD OVERALL LENGTH	12.641 INCHES
BOARD OVERALL WIDTH	1.250 INCHES
BODY STYLE	BARRIER TYPE
CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH	1.500 INCHES
CENTER TO CENTER DISTANCE BETWEEN TERMINALS	1.500 INCHES
DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE	0.625 INCHES
MATERIAL	PLASTIC BOARD
MATERIAL	STEEL TERMINALS
MOUNTING FACILITY TYPE AND QUANTITY	9 UNTHREADED HOLE
MOUNTING HOLE DIAMETER	0.141 INCHES
NONFEEDTHRU TERMINAL QUANTITY	8 SINGLE
NONFEEDTHRU TERMINAL TYPE	598 SINGLE
SPECIAL FEATURES	8 MAX NON-FEED-THROUGH TERMINALS,CUT TO DESIREDSIZE AT POINT OF INSTALLATION
TERMINAL DESIGN	NONFEEDTHRU
TERMINAL PATTERN ARRANGEMENT	SINGLE ROW
TERMINAL ROW QUANTITY	1

Click here to Register for Free 30-day Trial