|
|
|
National Stock Number:
5940-00-983-6063
Federal Supply Class:
5940
National Item Identification Number:
009836063
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 40TB2 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | 40TB2 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 852801-002 | 06141 | L3 AVIATION PRODUCTS, INC. | | A-A-59125/04 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MIL-T-55164/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.141 INCHES | | BASE THICKNESS | 0.328 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.484 INCHES | | BOARD OVERALL HEIGHT | 0.922 INCHES | | BOARD OVERALL LENGTH | 1.422 INCHES | | BOARD OVERALL WIDTH | 0.922 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.125 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.312 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.375 INCHES | | CURRENT RATING IN AMPS | 7.5 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.312 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.282 INCHES | | FEEDTHRU CONNECTION END TYPE | 857 FIRST END SINGLE COMBINATION | | FEEDTHRU CONNECTION END TYPE | F4 SECOND END SINGLE COMBINATION | | FEEDTHRU TERMINAL QUANTITY | 2 SINGLE COMBINATION | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC BOARD | | MOUNTING HOLE DIAMETER | 0.171 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-N-290,CLASS 1,TYPE 8 FED SPEC 1ST TREATMENT RESPONSE TERMINALS | | SURFACE TREATMENT | NICKEL AND TIN TERMINALS | | TERMINAL CONNECTING LINK QUANTITY | 2 SINGLE | | TERMINAL CONNECTING LINK TYPE | 1 SINGLE | | TERMINAL DESIGN | FEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 2 |
|
|