|
|
|
National Stock Number:
5940-00-983-6071
Federal Supply Class:
5940
National Item Identification Number:
009836071
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 0247-10 | 56232 | LOCKHEED MARTIN CORPORATION | | 031778-0010 | 65597 | THALES USA, INC. | | 20110 | 26405 | REGAL BELOIT AMERICA, INC | | 31778-10 | 65597 | THALES USA, INC. | | 10-1401 | 71785 | CINCH CONNECTIVITY SOLUTIONS INC. | | 20110 | 83330 | DIALIGHT CORPORATION | | 600A-YSY-10 | 26405 | REGAL BELOIT AMERICA, INC | | 40TB10 | 32241 | JAYMAR TERMINAL BOARDS INC | | 40TB10 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | 353-18-10-001 | 71785 | CINCH CONNECTIVITY SOLUTIONS INC. | | 37310-6 | 73891 | DISPUTE/ CONFLICT MEDIATION SERVICES | | 40TB10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 405B10 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 37310-6 | 98410 | MOLEX-ETC INC SUB OF MOLEX INC | | F306 | 57655 | NAUTEL MAINE INC | | A-A-59125 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | A-A-59125/4 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | AA59125/4-40TB10 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | MIL-T-55164/4 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 600A-YSY-10 | 83330 | DIALIGHT CORPORATION | | 670AYPSIF10 | 83330 | DIALIGHT CORPORATION | | S73-1921 | 90536 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 3000.0 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.156 INCHES | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.312 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.141 INCHES | | BASE THICKNESS | 0.312 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.469 INCHES | | BOARD OVERALL HEIGHT | 0.906 INCHES | | BOARD OVERALL LENGTH | 7.438 INCHES | | BOARD OVERALL WIDTH | 0.875 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.141 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.312 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.375 INCHES | | CURRENT RATING IN AMPS | 7.5 | | FEEDTHRU CONNECTION END TYPE | 857 FOURTH COMBINATION BOTH ENDS | | FEEDTHRU CONNECTION END TYPE | F4 15TH MATERIAL RESPONSE BOTH ENDS | | FEEDTHRU TERMINAL QUANTITY | 10 SINGLE COMBINATION | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | PLASTIC DIALLYL PHTHALATE BOARD AND GLASS FIBER BOARD | | PROPRIETARY CHARACTERISTICS | PACS | | MOUNTING HOLE DIAMETER | 0.168 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | SURFACE TREATMENT | NICKEL TERMINALS AND TIN TERMINALS | | TERMINAL DESIGN | FEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 2 |
|
|