|
|
|
National Stock Number:
5940-00-983-6100
Federal Supply Class:
5940
National Item Identification Number:
009836100
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 10044139-5 | 18876 | U S ARMY AVIATION AND MISSILE COMMAND | | 13230E6683-4 | 97403 | CECOM LR CENTER | | 22005 | 26405 | REGAL BELOIT AMERICA, INC | | 142-5 | 71785 | CINCH CONNECTIVITY SOLUTIONS INC. | | 22005 | 83330 | DIALIGHT CORPORATION | | 220242-006 | 95802 | AIR SYSTEMS COMPONENTS INC | | 305 | 26405 | REGAL BELOIT AMERICA, INC | | 39TB05F | 26405 | REGAL BELOIT AMERICA, INC | | 341A3250001 | 30464 | GENERAL ELECTRIC CO LARGE STEAM TURBINE-GENERATOR DEPT | | 39TB5 | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | 355-11-05-001 | 71785 | CINCH CONNECTIVITY SOLUTIONS INC. | | 29005 | 73891 | DISPUTE/ CONFLICT MEDIATION SERVICES | | 39TB5 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 29005 | 98410 | MOLEX-ETC INC SUB OF MOLEX INC | | 895A656AG001 | 01288 | GENERAL ELECTRIC CO DIRECT CURRENT MOTOR AND GENERATOR DEPT | | 7903327-03 | 06401 | L3 TECHNOLOGIES, INC. | | A-A-59125A | 58536 | FEDERAL COMMERCIAL ITEM DESCRIPTION PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | | CID A-A-59125 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MIL-T-55164/3 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 39TB5F | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 39TB5Z | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 602-5 | 83330 | DIALIGHT CORPORATION | | 622-5 | 83330 | DIALIGHT CORPORATION | | 5940PL0909292 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 7903327-03 | 90536 | LOCKHEED MARTIN CORP | | MN4-11 | 98437 | ELLIS & WATTS INTERNATIONAL, LLC |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.203 INCHES | | BASE THICKNESS | 0.438 INCHES | | BOARD CONSTRUCTION | HOLLOW CONSTRUCTION WITHOUT INSULATED STRIP | | BOARD HEIGHT EXCLUDING TERMINALS | 0.688 INCHES | | BOARD OVERALL HEIGHT | 0.688 INCHES | | BOARD OVERALL LENGTH | 3.812 INCHES | | BOARD OVERALL WIDTH | 1.312 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.375 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.500 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.562 INCHES | | CURRENT RATING IN AMPS | 30.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 4000.0 | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 0.500 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.219 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-19833,TYPE GDI-30F MIL SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | PLASTIC DIALLYL PHTHALATE AND GLASS FIBER BOARD | | MOUNTING HOLE DIAMETER | 0.221 INCHES | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | NONFEEDTHRU TERMINAL QUANTITY | 5 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 857 SINGLE | | SURFACE TREATMENT | NICKEL TERMINALS | | TERMINAL CONNECTING LINK QUANTITY | 5 SINGLE | | TERMINAL CONNECTING LINK TYPE | 1 SINGLE | | TERMINAL DESIGN | LINKED NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 2 |
|
|