|
|
|
National Stock Number:
5940-01-056-2960
Federal Supply Class:
5940
National Item Identification Number:
010562960
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 29-401-1652 | 06229 | WIELAND INC | | 29-401-1653 | 06229 | WIELAND INC | | 29.404.1653 | 06229 | WIELAND INC | | KL16/16PADS29.401.1653 | 06229 | WIELAND INC | | 401-7618807 ITEM 69 | 53711 | NAVAL SEA SYSTEMS COMMAND | | A05829-005 | 94697 | MOOG INC |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.338 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD OVERALL HEIGHT | 0.709 INCHES | | BOARD OVERALL LENGTH | 3.860 INCHES | | BOARD OVERALL WIDTH | 0.894 INCHES | | BODY STYLE | PRESSURE-CONTACT-RIGID | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 3.183 INCHES | | CURRENT RATING IN AMPS | 25.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 300.0 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.447 INCHES | | FEEDTHRU CONNECTION END TYPE | 617 BOTH ENDS SINGLE COMBINATION | | FEEDTHRU TERMINAL QUANTITY | 16 SINGLE COMBINATION | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC POLYPROPYLENE BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.138 INCHES | | SURFACE TREATMENT | NICKEL TERMINALS | | TERMINAL DESIGN | FEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | RANDOM |
|
|