|
|
|
National Stock Number:
5940-01-128-2240
Federal Supply Class:
5940
National Item Identification Number:
011282240
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 10132100 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | 106A | 19904 | STROCO MANUFACTURING, INC. | | 1306 | 19904 | STROCO MANUFACTURING, INC. | | ST5M1379-006A | 59570 | TRICO MANUFACTURING INC. | | 106A | 59750 | RMB MINIATURE BEARINGS INC | | ST5M1379-006A | 76301 | THE BOEING COMPANY | | ST5M1379F106 | 76301 | THE BOEING COMPANY |
|
Techincal Specification:
| BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD OVERALL LENGTH | 4.500 INCHES | | BOARD OVERALL WIDTH | 0.750 INCHES | | BOARD THICKNESS | 0.063 INCHES | | BODY STYLE | STRIP TYPE | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.750 INCHES | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-250/11,T6 FED SPEC SINGLE MATERIAL RESPONSE BOARD | | MATERIAL | ALUMINUM ALLOY 6061 BOARD | | MATERIAL | STEEL TERMINALS | | MOUNTING FACILITY TYPE AND QUANTITY | 1 FRICTION | | NONFEEDTHRU TERMINAL QUANTITY | 6 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 597 SINGLE | | SPECIAL FEATURES | EPOXY PRIMER NOT TO BE APPLIED IN AREA OF TERMINAL CONTACT; FIVE 0.094 IN. DIA PILOT HOLES LOCATED 0.280 IN. FROM BOTTOM OF TERMINAL BOARD TO CENTER OF PILOT HOLES AND 0.380 IN. FROM CENTER OF TERMINAL TO CENTER OF PILOT HOLE | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW | | TERMINAL ROW QUANTITY | 1 |
|
|