|
|
|
National Stock Number:
5940-01-131-0359
Federal Supply Class:
5940
National Item Identification Number:
011310359
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 72524 | 13150 | AXSYS TECHNOLOGIES INC |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.230 INCHES | | BASE THICKNESS | 0.380 INCHES | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | BOARD HEIGHT EXCLUDING TERMINALS | 0.660 INCHES | | BOARD OVERALL HEIGHT | 0.860 INCHES | | BOARD OVERALL LENGTH | 9.830 INCHES | | BOARD OVERALL WIDTH | 0.630 INCHES | | BODY STYLE | BARRIER TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 9.380 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.380 INCHES | | CURRENT RATING IN AMPS | 20.0 | | DIELECTRIC WITHSTANDING VOLTAGE IN VOLTS | 10500.0 | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.235 INCHES | | FEEDTHRU CONNECTION END TYPE | 441 SECOND END SINGLE COMBINATION | | FEEDTHRU CONNECTION END TYPE | 857 FIRST END SINGLE COMBINATION | | FEEDTHRU TERMINAL QUANTITY | 24 SINGLE COMBINATION | | MATERIAL | GLASS BOARD | | MATERIAL | COPPER ALLOY TERMINALS | | MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.156 INCHES | | SURFACE TREATMENT | CADMIUM AND TIN TERMINALS | | TERMINAL DESIGN | FEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | SINGLE ROW |
|
|