|
|
|
National Stock Number:
5940-01-285-3286
Federal Supply Class:
5940
National Item Identification Number:
012853286
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 132536G1 | 94271 | LOCKHEED MARTIN CORP |
|
Techincal Specification:
| MOUNTING HOLE DIAMETER | 0.171 INCHES | | SPECIAL FEATURES | SPECIAL REQUIREMENTS FOR NUCLEAR PROPULSION PLANT EQUIPMENT CONTAINED IN INDIVIDUAL REPAIR PARTS ORDERING DATA INSTRUMENTATION IRPOD SI NO. C15EADC02A,PLISN NO. 0002 | | SPECIAL MARKINGS | R6 THRU R10,AND E1 THRU E16 | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SPECIAL FEATURES | | THE MANUFACTURERS DATA | | | MANUFACTURERS CODE | 94271 | | DESIGN CONTROL REFERENCE | 132536G1 | | BODY STYLE | STRIP TYPE | | BOARD CONSTRUCTION | SOLID CONSTRUCTION | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MATERIAL | PLASTIC BOARD | | COPPER ALLOY TERMINALS | | BOARD OVERALL LENGTH | 4.880 INCHES | | BOARD OVERALL WIDTH | 2.750 INCHES | | BOARD THICKNESS | 0.094 INCHES | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL ROW QUANTITY | 2 | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 2.000 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.500 INCHES | | TERMINAL DESIGN | NONFEEDTHRU | | NONFEEDTHRU TERMINAL TYPE | 434 SINGLE | | NONFEEDTHRU TERMINAL QUANTITY | 16 SINGLE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 4.500 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 2.375 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.190 INCHES | | DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.190 INCHES |
|
|