|
|
|
National Stock Number:
5940-01-486-5833
Federal Supply Class:
5940
National Item Identification Number:
014865833
Description:
TERMINAL BOARD
Detail:
An item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. It is usually used for junctions or terminations of wire or cable assemblies. It does not include items as defined above with parts, such as resistors and capacitors mounted thereon. Do not use if a more specific name exists, such as FUSEHOLDER; HOLDER, RESISTOR; FANNING STRIP; CONTACT ASSEMBLY, ELECTRICAL; JACK ASSEMBLY, TIP; CHAMBER, CABLE TERMINAL; PANEL (2) (as modified); CONNECTOR (as modified). Excludes TERMINAL, STUD; TERMINAL, FEEDTHRU, INSULATED; POST, BINDING, ELECTRICAL; and CHASSIS, ELECTRICAL-ELECTRONIC EQUIPMENT. For items having printed electrical conductor paths, see PRINTED WIRING BOARD.
|
Manufacturer Information:
| 703-7068523-329 | 53711 | NAVAL SEA SYSTEMS COMMAND | | 7068523 | 53711 | NAVAL SEA SYSTEMS COMMAND | | H832-7101-329 | 96169 | ELECTRIC BOAT CORPORATION | | MS27249 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27249-2E3 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DISTANCE FROM LEFT EDGE OF TERMINAL BOARD TO CENTER OF FIRST MOUNTING FACILITY | 0.188 INCHES | | BOARD CONSTRUCTION | SCORED FOR EASY BREAKING INTO SMALLER TERMINAL BOARDS | | BOARD OVERALL LENGTH | 7.875 INCHES | | BOARD OVERALL WIDTH | 1.500 INCHES | | BOARD THICKNESS | 0.125 INCHES | | BODY STYLE | STRIP TYPE | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 2.249 INCHES | | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.000 INCHES | | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.375 INCHES | | DISTANCE FROM BOTTOM EDGE OF TERMINAL BOARD TO CENTER OF MOUNTING HOLE | 0.250 INCHES | | DISTANCE BETWEEN TERMINAL ROW CENTERS | 1.000 INCHES | | MATERIAL | COPPER ALLOY TERMINALS | | MATERIAL | PLASTIC BOARD | | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED HOLE | | MOUNTING HOLE DIAMETER | 0.120 INCHES | | NONFEEDTHRU TERMINAL QUANTITY | 30 SINGLE | | NONFEEDTHRU TERMINAL TYPE | 434 SINGLE | | SECTION QUANTITY | 3 | | SPECIAL FEATURES | BOARD MATERIAL IN ACCORDANCE WITH MIL-I-24768/3, TYPE GEE | | TERMINAL DESIGN | NONFEEDTHRU | | TERMINAL PATTERN ARRANGEMENT | MULTI-ROW | | TERMINAL QUANTITY PER SECTION | 10 | | TERMINAL ROW QUANTITY | 2 |
|
|