| ARC QUENCHING METHOD | INERT GAS |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO THE ALTITUDE OF AN ISOSCELES TRIANGLE | 2.594 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.813 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| COIL QUANTITY | 2 |
| CUBIC MEASURE | 16.669 CUBIC INCHES |
| DUTY TYPE | CONTINUOUS |
| ENVIRONMENTAL PROTECTION | HERMETIC |
| FEATURES PROVIDED | POLARIZED |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 5.0 AMPERES AC AND 5.0 AMPERES DC RESISTIVE LOAD |
| MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 120.0 AC AND 28.0 DC |
| MATERIAL | COPPER ALLOY CASE |
| MATERIAL | SILVER CONTACT |
| MINIMUM DIFFERENTIAL ELECTRICAL OPERATING RATING | 4.2 MILLIAMPERES |
| MOUNTING FACILITY PATTERN | TRIANGLE SINGLE MOUNTING FACILITY |
| MOUNTING FACILITY TYPE AND QUANTITY | 3 THREADED STUD SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.164 INCHES SINGLE MOUNTING FACILITY |
| NONPILE-UP MAIN CONTACT ARRANGEMENT | 4 POLE, SINGLE THROW, NORMALLY OPEN, MOMENTARY ACTION |
| OVERALL HEIGHT | 2.500 INCHES NOMINAL |
| OVERALL LENGTH | 3.810 INCHES NOMINAL |
| OVERALL WIDTH | 1.750 INCHES NOMINAL |
| SPECIAL FEATURES | A. WHEN THE CURRENT DIFFERENCE REACHES 0.0042 AMP IN TWO COILS THE COIL WITH THE HIGHER CURRENT WILL CLOSE TWO SETS OF SPST,NORMALLY OPEN CONTACTS,WHEN THE SAME CURRENT DIFFERENCE APPEARS IN OTHER COIL THE OTHER TWO SETS OF SPST NORMALLY OPEN CONTACTS WILL CLOSE,AND THE FIRST SET OF CONTACTS WILL OPEN |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER |
| PRECIOUS MATERIAL | SILVER |
| PURPOSE FOR WHICH DESIGNED | GENERAL |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| TERMINAL TYPE AND QUANTITY | 12 TAB, SOLDER LUG ALL FUNCTIONS |
| THREAD CLASS | 2A SINGLE MOUNTING FACILITY |
| THREAD LENGTH | 0.328 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| THREAD DIRECTION | RIGHT-HAND SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC SINGLE MOUNTING FACILITY |
| WINDING DC RESISTANCE RATING | 2.5 KILOHMS NOMINAL ALL WINDINGS |
| WINDING QUANTITY | 2 |