|
|
|
National Stock Number:
5945-00-738-2254
Federal Supply Class:
5945
National Item Identification Number:
007382254
Description:
FLASHER,THERMAL
Detail:
AN ITEM DESIGNED TO COMPLETE, INTERRUPT OR CHANGE THE CONNECTIONS IN ONE OR MORE ELECTRICAL LIGHTING CIRCUITS IN ACCORDANCE WITH A PREDETERMINED TIME CYCLE. IT IS ACTUATED BY THE EFFECT OF HEAT GENERATED BY CURRENT PASSING THROUGH ITS CIRCUIT(S). EXCLUDES CONTROL, DIRECTIONAL SIGNAL LIGHT, AUTOMOTIVE, AND SWITCH THERMOSTATIC. SEE ALSO FLASHER, SOLID STATE.
|
Manufacturer Information:
| 3183 | 09959 | AIRCRAFT INSTRUMENTS CO | | 3251 | 96238 | DNE TECHNOLOGIES, INC | | A738-1 | 15420 | LOGITEK INC | | BM-208-28-2 | 33871 | BILL MCCLUNG INC | | MIL-F-26301 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS27710-01 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| ADJUSTABILITY | NONADJUSTABLE | | FLASHING RATE | 85 PER MINUTE NOMINAL | | DUTY CYCLE | 1.4 SECONDS ON | | ACCURACY IN PERCENT | 4.2 | | FAILURE AUTOMATIC CIRCUIT CONDITION | OFF | | CONTROLLED CIRCUIT QUANTITY | 1 | | ACTUATION TYPE | ELECTROMECHANICAL | | DC VOLTAGE RATING | 20.0 VOLTS MINIMUM AND | | 30.0 VOLTS MAXIMUM | | TERMINAL QUANTITY | 1 | | TERMINAL TYPE | CONNECTOR, RECEPTACLE | | ENVIRONMENTAL PROTECTION | HERMETICALLY SEALED | | OVERALL LENGTH | 3.187 INCHES MAXIMUM | | OVERALL HEIGHT | 2.562 INCHES MAXIMUM | | OVERALL WIDTH | 2.687 INCHES MAXIMUM | | MOUNTING CONFIGURATION | 4 MTG HOLES 0.190 IN. DIA ON 2.312 IN. BY 1.750 IN. MTG CENTERS | | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL | | TEST DATA DOCUMENT | 81349-MIL-F-26301 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). | | CRITICALITY CODE JUSTIFICATION | FEAT | | CUBIC MEASURE | 16.510 CUBIC INCHES | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 81349 | | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MIL-F-26301 | | MANUFACTURERS CODE | 96906 | | DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MS27710-01 |
|
|