|
|
|
National Stock Number:
5945-00-752-5599
Federal Supply Class:
5945
National Item Identification Number:
007525599
Description:
FLASHER,SOLID STATE
Detail:
AN ITEM DESIGNED TO COMPLETE, INTERRUPT OR CHANGE THE CONNECTIONS IN ONE OR MORE ELECTRICAL LIGHTING CIRCUITS IN ACCORDANCE WITH A PREDETERMINED TIME CYCLE. IT IS ACTUATED BY THE EFFECT OF HEAT GENERATED BY CURRENT PASSING THROUGH ITS CIRCUIT(S). EXCLUDES CONTROL, DIRECTIONAL SIGNAL LIGHT, AUTOMOTIVE, AND SWITCH THERMOSTATIC. SEE ALSO FLASHER, SOLID STATE.
|
Manufacturer Information:
| 3085-2.4/1-5 | 33871 | BILL MCCLUNG INC | | 3175A | 09959 | AIRCRAFT INSTRUMENTS CO | | A0095 | 0ZTH3 | MORITZ AEROSPACE CORPORATION | | A0095 | 1MXA1 | RADIANT POWER CORP | | 3241-4 | 96238 | DNE TECHNOLOGIES, INC | | 618278-3 | 98897 | LOCKHEED MARTIN CORP | | A915 | 15420 | LOGITEK INC | | BM3085-2.4/1-5 | 33871 | BILL MCCLUNG INC | | G5825-3 | 72914 | GRIMES AEROSPACE COMPANY | | MIL-F-26301 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24577-2A | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS24577-A | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | M825205-4 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| DUTY CYCLE | 2.0 SECONDS ON | | ACCURACY IN PERCENT | 10.0 | | ACTUATION TYPE | THERMAL | | ADJUSTABILITY | NONADJUSTABLE | | CONTROLLED CIRCUIT QUANTITY | 1 | | DC VOLTAGE RATING | 28.0 VOLTS NOMINAL | | ENVIRONMENTAL PROTECTION | DUSTPROOF AND WATERTIGHT | | FAILURE AUTOMATIC CIRCUIT CONDITION | OFF | | FLASHING RATE | 85 PER MINUTE NOMINAL | | OVERALL HEIGHT | 2.590 INCHES NOMINAL | | OVERALL LENGTH | 4.250 INCHES NOMINAL | | OVERALL WIDTH | 3.000 INCHES NOMINAL | | MOUNTING CONFIGURATION | FOUR 0.175 IN. DIA MFG HOLES SPACED ON 2.000 IN. BY 2.500 IN. MFG CENTERS | | TERMINAL QUANTITY | 1 | | TERMINAL TYPE | CONNECTOR, RECEPTACLE | | TEST DATA DOCUMENT | 81349-MIL-F-26301 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
|
|