| DUTY TYPE | CONTINUOUS |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.312 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.500 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| COIL QUANTITY | 1 |
| CUBIC MEASURE | 8.378 CUBIC INCHES |
| FREQUENCY IN HERTZ | 60.0 NOMINAL |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 20.0 AMPERES AC RESISTIVE LOAD |
| MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 120.0 AC |
| OVERALL HEIGHT | 2.312 INCHES NOMINAL |
| OVERALL LENGTH | 2.000 INCHES NOMINAL |
| OVERALL WIDTH | 1.812 INCHES NOMINAL |
| MATERIAL | SILVER CONTACT |
| MOUNTING FACILITY TYPE AND QUANTITY | 4 THREADED HOLE SINGLE MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | RECTANGULAR SINGLE MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.138 INCHES SINGLE MOUNTING FACILITY |
| NONPILE-UP MAIN CONTACT ARRANGEMENT | 5 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 6.0 VOLTS AC 25 DEG CELSIUS SINGLE WINDING |
| PRECIOUS MATERIAL AND LOCATION | CONTACTS SILVER AND CONTACT SURFACES GOLD |
| PRECIOUS MATERIAL | SILVER AND GOLD |
| WINDING QUANTITY | 1 |
| SURFACE TREATMENT | GOLD CONTACT |
| TERMINAL TYPE AND QUANTITY | 17 SCREW ALL FUNCTIONS |
| THREAD DIRECTION | RIGHT-HAND SINGLE MOUNTING FACILITY |
| THREAD CLASS | 2B SINGLE MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC SINGLE MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 SINGLE MOUNTING FACILITY |
| TIME DELAY | 0.02 SECONDS MAXIMUM FIXED RELEASE TIME |
| TIME DELAY | 0.035 SECONDS MAXIMUM FIXED OPERATE TIME |