| DUTY TYPE | CONTINUOUS |
| ACTUATOR LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
| ACTUATOR STROKE TYPE | PULL |
| ACTUATOR WIDTH | 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM |
| BODY HEIGHT | 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM |
| BODY LENGTH | 1.240 INCHES MINIMUM AND 1.260 INCHES MAXIMUM |
| BODY WIDTH | 0.834 INCHES MINIMUM AND 0.854 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.427 INCHES MINIMUM AND 0.447 INCHES MAXIMUM |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| MAGNETIC COIL QUANTITY | 1 |
| III BODY STYLE | U-FRAME |
| III CUBIC MEASURE | 1.108 CUBIC INCHES |
| INCLOSURE TYPE | UNINCLOSED |
| POWER TAKEOFF CONNECTION HOLE DIAMETER | 0.086 INCHES MINIMUM AND 0.106 INCHES MAXIMUM |
| POWER TAKEOFF CONNECTION TYPE | U-SHAPED BRACKET |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY PATTERN | TWO POSITION DIAGONAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE |
| NOMINAL THREAD SIZE | 0.138 INCHES MOUNTING FACILITY HOLE |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| TERMINAL LOCATION | END OPPOSITE ACTUATOR |
| TERMINAL TYPE AND QUANTITY | 2 TAB, SOLDER LUG |
| THREAD CLASS | 2B MOUNTING FACILITY HOLE |
| THREAD QUANTITY PER INCH | 32 MOUNTING FACILITY HOLE |
| THREAD SERIES DESIGNATOR | UNC MOUNTING FACILITY HOLE |