| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.850 INCHES MINIMUM THIRD MOUNTING FACILITY AND 1.890 INCHES MAXIMUM THIRD MOUNTING FACILITY |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 0.980 INCHES MINIMUM SECOND MOUNTING FACILITY AND 1.020 INCHES MAXIMUM SECOND MOUNTING FACILITY |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | 1.080 INCHES MINIMUM FIRST MOUNTING FACILITY AND 1.120 INCHES MAXIMUM FIRST MOUNTING FACILITY |
| COIL QUANTITY | 1 |
| FRAGILITY FACTOR | MODERATELY RUGGED |
| MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 32.0 DC |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 10.0 AMPERES DC RESISTIVE LOAD |
| III CUBIC MEASURE | 3.616 CUBIC INCHES |
| PROPRIETARY CHARACTERISTICS | PACS |
| MOUNTING FACILITY PATTERN | IN-LINE FIRST MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | IN-LINE SECOND MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | IN-LINE THIRD MOUNTING FACILITY |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE FIRST MOUNTING FACILITY |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED HOLE SECOND MOUNTING FACILITY |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 UNTHREADED HOLE THIRD MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.138 INCHES SECOND MOUNTING FACILITY |
| NOMINAL THREAD SIZE | 0.164 INCHES FIRST MOUNTING FACILITY |
| OVERALL HEIGHT | 0.840 INCHES MINIMUM AND 0.900 INCHES MAXIMUM |
| OVERALL LENGTH | 2.230 INCHES MINIMUM AND 2.270 INCHES MAXIMUM |
| OVERALL WIDTH | 1.730 INCHES MINIMUM AND 1.770 INCHES MAXIMUM |
| PURPOSE FOR WHICH DESIGNED | GENERAL |
| WINDING QUANTITY | 1 |
| STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| THREAD CLASS | 2B FIRST MOUNTING FACILITY |
| THREAD CLASS | 2B SECOND MOUNTING FACILITY |
| THREAD DIRECTION | RIGHT-HAND FIRST MOUNTING FACILITY |
| THREAD DIRECTION | RIGHT-HAND SECOND MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 FIRST MOUNTING FACILITY |
| THREAD QUANTITY PER INCH | 32 SECOND MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC FIRST MOUNTING FACILITY |
| THREAD SERIES DESIGNATOR | UNC SECOND MOUNTING FACILITY |
| UNTHREADED MOUNTING HOLE DIAMETER | 0.150 INCHES MINIMUM THIRD MOUNTING FACILITY AND 0.190 INCHES MAXIMUM THIRD MOUNTING FACILITY |