| NONPILE-UP MAIN CONTACT ARRANGEMENT | 2 POLE, DOUBLE THROW, ONE POSITION MOMENTARY |
| MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | 200.0 AC AND |
| 28.0 DC |
| MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 15.0 AMPERES AC AND |
| 15.0 AMPERES DC RESISTIVE LOAD |
| 8.0 AMPERES AC AND |
| 8.0 AMPERES DC INDUCTIVE LOAD |
| 2.0 AMPERES AC AND |
| 2.0 AMPERES DC LAMP LOAD |
| 6.0 AMPERES AC AND |
| 4.0 AMPERES DC MOTOR LOAD |
| COIL QUANTITY | 1 |
| WINDING QUANTITY | 1 |
| WINDING DC RESISTANCE RATING | 320.0 OHMS NOMINAL SINGLE WINDING |
| OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | 28.0 VOLTS DC 25 DEG CELSIUS SINGLE WINDING |
| TERMINAL TYPE AND QUANTITY | 8 PIN ALL FUNCTIONS |
| DUTY TYPE | CONTINUOUS |
| ENVIRONMENTAL PROTECTION | HERMETIC |
| OVERALL LENGTH | 1.718 INCHES MAXIMUM |
| OVERALL WIDTH | 0.525 INCHES MAXIMUM |
| OVERALL HEIGHT | 1.310 INCHES NOMINAL |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 SLOTTED HOLE SINGLE MOUNTING FACILITY |
| MOUNTING FACILITY PATTERN | IN-LINE SINGLE MOUNTING FACILITY |
| CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | 1.396 INCHES MINIMUM AND |
| 1.446 INCHES MAXIMUM SINGLE MOUNTING FACILITY |
| MOUNTING SLOT WIDTH | 0.150 INCHES NOMINAL SINGLE MOUNTING FACILITY |
| FEATURES PROVIDED | POLARIZED |
| SPECIAL FEATURES | TEMP RANGE MINUS 70.0 DEG TO PLUS 125.0 DEG C; PICKUP VOLTAGE 18.0 VDC MAX; HOLD VOLTAGE 7.0 VDC; DROP-OUT VOLTAGE 1.5 VDC MIN; COIL CURRENT 0.11 AMP MAX; TERMINAL STRENGTH 5.0 LBS NOMINAL; PINS ARE UNDERPLATED (EXCEPT POLARIZING PIN IS TINNED) PRIOR TO GOLD PLATING (PER MIL-G-45204, TYPE II, CLASS I) WITH NICKEL 50.000 TO 150.000 MICROINCHES THICK; PINS ARE 0.062 INCH NOMINAL DIA AND 0.270 INCH NOMINAL LENGTH WITH EXCEPTION OF POLARIZING PIN WHICH IS 0.300 INCH NOMINAL LENGTH; 0.050 INCH NOMINAL THICKNESS SILICONE RUBBER GASKET PER AMS 3332, WITH SHORE HARDNESS OF 20, IS LOCATED AGAINST BOTTOM OF CASE AND AT BASE OF PINS |
| PRECIOUS MATERIAL AND LOCATION | TERMINALS GOLD |