| DUTY TYPE | CONTINUOUS AND PULSE |
| ELECTRIC POWER RATING | 7.0 WATTS MINIMUM AND 140.0 WATTS MAXIMUM |
| ELECTRICAL RESISTANCE | 3.16 OHMS NOMINAL |
| ACTUATOR DIAMETER | 0.156 INCHES NOMINAL |
| ACTUATOR STROKE TYPE | ROTARY |
| BODY DIAMETER | 1.156 INCHES NOMINAL |
| BODY HEIGHT | 0.719 INCHES NOMINAL |
| BODY STYLE | DOUBLE ENDED ACTUATOR |
| CASE SURFACE TREATMENT | DICHROMATE |
| ENERGIZING STROKE MAXIMUM LENGTH | 0.025 INCHES |
| INCLOSURE TYPE | FULLY INCLOSED |
| MAGNETIC COIL QUANTITY | 1 |
| MATERIAL | ZINC CASE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 THREADED STUD |
| MOUNTING FACILITY PATTERN | TWO POSITION IN-LINE |
| NOMINAL THREAD SIZE | 0.099 INCHES MOUNTING FACILITY STUD |
| POWER TAKEOFF CONNECTION TYPE | PLAIN |
| ROTATION DIRECTION AND ENERGIZING STROKE IN ANGULAR DEG | 45.0 COUNTERCLOCKWISE |
| VOLTAGE RATING IN VOLTS | 4.5 AC MINIMUM AND 20.0 AC MAXIMUM |
| TERMINAL LOCATION | CIRCUMFERENCE |
| TERMINAL TYPE AND QUANTITY | 2 WIRE LEAD |
| TEST DATA DOCUMENT | 72314-1425PD0304 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD DIRECTION | RIGHT-HAND MOUNTING FACILITY STUD |
| THREAD CLASS | 2A MOUNTING FACILITY STUD |
| THREAD LENGTH | 0.361 INCHES NOMINAL MOUNTING FACILITY STUD |
| THREAD QUANTITY PER INCH | 48 MOUNTING FACILITY STUD |
| THREAD SERIES DESIGNATOR | UNC MOUNTING FACILITY STUD |
| THREAD TOLERANCE CLASS | 2A EXTERNAL MOUNTING FACILITY STUD |
| TORQUE RATING AND TYPE | 0.30 INCH-POUNDS END |